Air cooled press from Hansweld , have different models for width from 300 mm to 1500 mm
used for pvc belt etc. thermoplastic belt materials
portable splice press, light weight and with flight case as standard packing, is easily removed to any where for job site use
Fast splicing: include heating time and cooling time, no more than 12 mins.
All in one design: the press has an integrated air-cooling system and also air compresor inside. to ensures that the belt is quickly cooled down and auto press on, without water pump or aditional air compressor.
light weight and reliable and automatic temperature control with time control (in one meter, also you can set by yourself).
air pressure controller (set the air pressure and display the current pressure)
voltage: 220v or 380v, if special voltage pls freely to inform us.
1. Presses from Hansweld are supplied with a flight case for
both storage purposes and also for easy transport to
2. Place press in the flight case so the end with the
power receptacles is facing the storage compartment.
This will protect the receptacles from damage when
3. Flight cases for the HSD300-900 have two wheels.
HSD1200-1500 are packaged in flight cases with four
wheels and an extension handle.
4. Flight cases can be stacked on top of each other, but
need to be secured during transportation.
|Weight lower part
|Weight upper part
|Dimensions for transport
||712 x 352 x280 mm
||1012 x 352 x 280 mm
||1312 x 352 x 280 mm
||1612 x 352 x 280 mm
||1912 x 352 x 280 mm